Soil and Geotechnical Testing Equipment

Browse soil and geotechnical laboratory and site testing equipment. View specifications and request a quotation from Impact Test Equipment.

Equipment categories

Products (377)

Spare 19mm x 29mm Vane (SL810/1) — for use with SL810 Hand Vane Tester Vane blades are calibrated to pair with the torque head. The 19mm vane is for use up to full range of 220 kPa and the 33mm S
Spare 33mm x 50mm Vane (SL810/2) — for use with SL810 Hand Vane Tester The 33mm vane blade is used with the SL810 Hand Vane Tester to obtain readings from low strength material. For use from 0 to
Spare Airline Trigger Gun (SL630/10) — for use with compressor Supplied with two nozzles - standard (single hole) and pepperpot (multi-hole). 1/4" BSP air inlet.
Spare Aspirator (SL602) — for Membrane Stretcher Approximately 65ml bulb capacity, with non-return valve.
Spare Bladder (SL628/1) — for air/water cylinder SL628 BS1377-7, BS1377-8
Spare Hammer Shaft (Low) - SL970/3 (SL970/3) — For Use With Dynamic Cone Penetrometer (DCP Kit) - SL970 The SPARE HAMMER SHAFT LOW-DCP FN1005 910MM is a replacement component designed for use with a Dynamic
Spare Hammer Shaft (Upper) - SL970/2 (SL970/2) — For Use With Dynamic Cone Penetrometer (DCP Kit) - SL970 The SPARE HAMMER SHAFT UPPER – DCP FN1004 is a precision-engineered replacement component for the SL970
Spare MCV Mould (SL070/1) — for MCV Apparatus SL070 to BS 1377:4
Spare Vane 16mm x 32mm (SL840/2) — for hand vane tester SL840 BS1377-9 Only 1 vane supplied as per the description
Spare Vane 20mm x 40mm (SL840/3) — for hand vane tester SL840 BS1377-9 Only 1 vane supplied as per the description
Standard Penetrometer. (SL190) — Cone, cup, needles and penetration test gauge supplied separately. The Standard Dial Penetrometer is used to determine the consistency of a bituminous sample un
Static Compaction Plug/Spacer Disc ASTM (SL113) — 2.4 inches thick with removable handle
Static Compaction Plug/Spacer Disc BS (SL102) — 50mm thick with removable handle BS1377-4
Steel Pointed Rod (SL166) — to BS1377:9
Surcharge Weight 4.5kg Annular - SL104 (SL104) — Ring-shaped steel disk used in lab and field CBR testing. The 4.5kg annular surcharge weight is a ring-shaped steel disk used in California Bearing Ratio (CBR)
Surcharge Weight 4.5kg Solid (SL115) — Used to simulate or apply a known, controlled vertical load during lab tests. Product Information: A surcharge weight 45kg solid is used primarily in geotechnic
TLS Drill Bit Kit 100mm (SL975/5) — Contains 2 drill bits. Product Information: Drill bits to be used to make holes for the TLS Needle 100mm. Includes: 1x TLS Drill Bit 100 mm (#45 PTD Taper Lengt
TLS Needle Sleeves 100mm (SL975/3) — Pack of 5. Product Information: Needle sleeves are short tubular coverings that fit over the sensor needle. They assist in guiding the needle into pre-drilled h
TLS Thermal Paste (SL975/4) — 2oz Jar. Product Information: The TLS Thermal Paste is designed for enhancing contact between TLS sensor needles and the sample material as well as minimising a
TLS Verification Sample 100mm (SL975/1) — Macor Standard A. Product Information: The TLS Verification Sample 100mm (Macor Standard A) is a reference (calibration) sample crafted from Macor, used to veri
TLS-100 (SL975) — Thermal conductivity / thermal resistivity meter. Product Information: The TLS-100 (Transient Line Source) is a portable instrument designed to measure the ther
TR150 Digital Readout Unit (SL755) — Compatible with most Strain Gauge Based Sensors & Transducers This is a completely portable, precision instrument packaged in a small, robust IP65 (NEMA 4) encl
Temperature Data Logger - SL708 (SL708) — -35 to +80°C (-31 to +176°F) range. The USB Temperature Data Logger is a compact and easy-to-use device designed for monitoring and recording temperature data
Tempos Thermal Properties Meter Kit (SL752) — All the attached comes as a kit. SL752 INCLUDES THE FOLLOWING: TEMPOS THERMAL PROPERTIES METER Accuracy: ± 10% Measurement speed: 1, 2, 5, & 10 min. read times