Materials Testing Equipment Catalogue

Browse concrete, soils, aggregates, asphalt, sieving and civil engineering testing equipment by category, product code and standards.

Equipment categories

Products (4037)

Liquid Limit, Plastic Limit, and Plasticity Index to ASTM D4318 (ASTMD4318) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in ASTMD4318 - additional items may be re
Liquid limit to AASHTO T89 (AASHTOT89) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in AASHTOT89 - additional items may be re
Load Ring 30kN capacity (BM230) — with brake attachment to hold maximum reading
Loose bulk density & voids to EN1097-3 (EN1097-3) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN1097 part 3 - additional items may b
Los Angeles Abrasion Machine to EN1097-2, EN12697-17, EN12697-43 and ASTM C131. (AG175) — Supplied without abrasive charges.
Los Angeles abrasion to AASHTO T96 (AASHTOT96) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in AASHTOT96 - additional items may be re
Los Angeles abrasion to ASTM C131 (ASTMC131) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in ASTMC131 - additional items may be req
MOT Straight Edge 3 metre (BM620) — supplied with one incremented wedge
MOT Straight Edge Wedge (BM620/1) — for BM620 MOT straight edge
MP2 TLS 100mm Needle (SL975/9) — General-purpose thermal conductivity needle probe. The MP2 100 mm Needle Probe is a Transient Line Source (TLS) sensor designed for use with the Thermtest MP-2
MP2 TLS 50mm Spare Needle (SL975/2) — Used for thermal conductivity testing of concrete and rock samples. Product Information: The TLS 50mm needle is designed for testing rigid materials such as roc
Mackintosh Probe Prospecting Kit (SL015) — for sampling up to 25mm diameter and 15 metres deep The kit consists of the following items all contained in a durable plastic carrying case. 10 x 1 metre long
Macrotexture by volumetric patch method to EN13036-1 (EN13036-1) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN13036 part 1 - additional items may
Magnesium Sulphate Hydrated (CH071) — 25kg Material Safety Data Sheetavailable in PDF format
Magnesium Sulphate test to EN1367-2 (EN1367-2) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN1367 part 2 - additional items may b
Magnetic Dial Gauge Stand (MH140) — magnetic base with on/off switch & fine adjustment screw
Magnetic Stirrer / Hotplate (MH230) — maximum temperature 450 deg C Chemically resistant ceramic top Flashing HOT warning light Spill-proof design Microprocessor control for accurate temperature set
Making & curing no-fines test cubes to BS1881 part 113 (BS1881-113) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1881 part 113 - additional items may
Making & curing specimens for strength tests to EN12390-2 (EN12390-2) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN12390 part 2 - additional items may
Making 100 x 100 x 500mm test beams to BS1881 part 109/500mm (BS1881-109/500mm) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1881 part 109 - additional items may
Making 100 x 200mm test cylinders to BS1881 part 110/200mm (BS1881-110/200mm) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1881 part 110 - additional items may
Making 100mm test cubes to BS1881 part 108/100mm (BS1881-108/100mm) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1881 part 108 - additional items may
Making 150 x 150 x 750mm test beams to BS1881 part 109/750mm (BS1881-109/750mm) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1881 part 109 - additional items may
Making 150 x 150mm test cylinders to BS1881 part 110/150mm (BS1881-110/150mm) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1881 part 110 - additional items may